.jpg)
CR-MO 13/16" LAYBACK bicycle seat post with 7/8" seat mount
|
|
|
- Manufacturer: Porkchop BMX
- Condition: New
Chrome plated chromoly LAYBACK seat post
* Inserts into 13/16" (20.7mm) old school frames
* Top of the post is a larger (7/8") to work with standard seat guts
* Holding the post on a flat surface, the top of the post (seat mounting area) is at about 390mm (just over 15 1/4"). The minimum insertion mark is 3" from the bottom, but I'd stick more of it in the frame than that... only putting 3" in the frame is a great way to snap off a frame seat mast. And let's not forget that many older BMX frames has a lot of "rake" the the seat mast, so a layback seat post will be especially cantilevered. People have begged for layback 13/16" seat posts, so here they are - however, I don't think they're such a great idea.
* Now run a wider range of seats on your old school BMX
* 13/16" was also used on many French road bikes - but please be sure to measure before ordering.
* Brand new, never mounted (but purchased in bulk, so no fancy retail packaging).
* These are 100% chromoly ("CR-MO" is laser engraved near the top as can be seen in the 2nd picture)
